The Grundfos CR vertical, multistage, centrifugal in-line pump family works for water supply, water treatment and almost any industrial solution – including those for high-pressure, hot, dangerous, flammable and aggressive liquids.
The CR is available in millions of different configurations through four modules:
- Shaft seals
- Pump modules
We offer a “mix and match” modular approach, so you can configure a pump that meets your exact needs. We test, qualify and document all modules, just like we do for any standard Grundfos pump.
The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel and titanium. Thirteen flow sizes are capable of producing up to 180 m3/h at 50 bar, with a variety of shaft seals, rubber materials and supply voltages.
We optimise pump parts that are typically vulnerable to difficult liquids or demanding operating conditions.
We also offer highly efficient “E” version pumps with a built-in frequency converter or pumps with an external frequency converter (CUE). These combine the very best of pump technology with highly efficient motors and variable speed drives. You will never use more energy than you need.
- Balanced shaft seal
- Wear-resistant bearing material
- Laser-welded impellers
- Energy-optimised pumps (EU minimum efficiency index (MEI) benchmark of MEI ≥ 0.70)
- Premium efficiency IE3/IE4 motors
- Easy service, minimal downtime
- High pressure
- High temperature
- Difficult liquids
Vertical, in-line multistage
Sizes: 13 – from 1-150 (basic pump range)
Head max: 50 bar
Flow max: 184 m3/h
Temperature range from -40 to 180 °C
Motor range from 0.37 to 75 kW
Material versions: CR, CRI, CRN and CRT
The CR family
|CR, CRE||Cast iron base and top, all wetted parts in stainless steel (EN 1.4301)|
|CRI, CRIE||Base, top and all wetted parts in stainless steel (EN 1.4301)|
|CRN, CRNE||Base, top and all wetted parts in high-grade stainless steel (EN 1.4401)|
|CRT, CRTE||Base, top and all wetted parts in Titanium (ASTM B 265)|
|CRNE-HS||Compact, high-speed single pump system for high pressure|
|CRN SF||Double pump system designed for high pressure and high flow|
Note: For all variants from 22 kW and below, we offer an optional integrated or an external frequency converter from 0.37 to 75 kW.
- Standard: For pumping water-like liquids for distribution of light treatment, we offer our standard CR or the CRI water pump.
- Industrial: We have added further modular solutions to cope with very high pressures, very high temperatures, very aggressive, very corrosive or very dangerous liquids. The industrial range includes the CR, CRI, CRN and CRT lines.
|High pressures||Water||Water Treatment|
Steam boiler feed
Washing and cleaning
|Hot liquid||Mineral Oils||Boiler feed|
|Water||Washing and cleaning|
|Aggressive or Corrosice||Desinfections|
|Marine and industrial processes|
|Abrasive||Cleaners/degreasers, such as metasilicates||Washing and cleaning|
|Toxic or Flammable||Solvents, fuels, alcohols, etc.||Industrial processes|
|High-viscosity||Mineral-/synthetic oils||Industrial processes|
|Crystallising||Glycol additives, naphthalene, sugar products (e.g. dextran), salts||Industrial processes|
The Grundfos CR is suitable for
- Industrial processing systems
- Washing and cleaning systems
- Pumping of acids and alkalis
- Filtration systems
- Water pressure boosting
- Water Treatment
Austrian utility: 'We didn't believe energy savings of this size were possible'
For the water booster supply application after sand filtration/backwash at Wasserverband Südliches Burgenland in...
District heating plant tests new Grundfos CR pumps, gains 10 percent efficiency
In autumn 2015, the Danish Hirtshals District Heating plant installed three CR-95 field test units from the new...
Rolinck private brewery: Grundfos pumps in primary and secondary processes
The beers produced by the A. Rolinck private brewery established in 1820 in Steinfurt enjoy an excellent reputation...
Grundfos pumps in world-leader Rain Bird golf-course irrigation systems
Rain Bird Corporation is one of the leading irrigation manufacturers in the world.
Grundfos CR pumps for fire fighting systems
NK Co. Ltd. of Busan, Korea, was established in 1980 under the name of Nam Yang.
Bolshoi Theatre gets a complete re-fit
The Moscow Bolshoi was first formed back in 1776. The company’s theatre building was originally constructed in 1824...
Energy cost savings of EUR 13,000 per year
With the new Grundfos CR booster pumps, ZPW2 Grenzland Süd-Ost / Bad Gleichenberg water works can achieve energy...
The security of a Grundfos service contract
Arla Foods is one of the world’s leading and most innovative dairy companies. It does business in 120 countries...
Boart Longyear: Grundfos CR pumps for state-of-the-art mining equipment
Boart Longyear is a major player in the global core drilling market with a strong position as a leading...
Full pump programme supplied to brand-new Tuscan wastewater plant
The new wastewater treatment plant built by V.E.A. in Pietrasanta, Tuscany, uses Grundfos equipment throughout to...
Grundfos pumps improve the quality of life in China
The new wastewater treatment plant in Deyang City has removed the city’s odour problems and reduced the pollution...
High pressure pump for RO plant
Weil Industrieanlagen GmbH is a specialist in water purification and water treatment and was established in 1986....
Parmalat has chosen Grundfos Digital Dosing pumps for the water treatment system that is vital for operations at...
CR paid for itself after two batches
Agrochemical manufacturer Albaugh Inc. is one of the largest producers of generic herbicide in the US. Albaugh Inc....
Grundfos CR pumps with LiqTec seal technology pave the way for Philippine boiler export
Enertech Systems Industries Inc. in Quezon City, Philippines, is the country’s leading manufacturer of boilers and...
Grundfos CR pumps for state-of-the-art mining equipment
Boart Longyear is a major player in the global core drilling market with a strong position as a leading...
Lübzin Waterworks: optimum value for specific energy expenditure
EURAWASSER Nord GmbH’s partner is EURAWASSER Aufbereitungs- und Entsorgungs GmbH Berlin, a subsidiary of SUEZ...
New and easy way to manage irrigation systems
Water engineering and specialist sports-turf contractor, MJ Abbot Limited used Grundfos’ new data communication...
Outstanding service impressed Dongan Engine
Grundfos after-sales service and support created tight bonds between Grundfos and Dongan Engine.
High ambitions for Moscow’s Tower 2000
The prestigious Moscow City project covers 100 hectares in Moscow’s central business district, and is due to be...
Forward thinking wins prestigious contract in China
Shenzhen, China: Located in the southern tip of Guangdong province, Shenzhen is the only mainland city that borders...
Customised solution for Switzerland’s largest shopping centre
Einkaufszentrum Glatt is the largest independent shopping centre in Switzerland, and is at the top of the Swiss...
Grundfos fire protection system protects shoppers’ paradise in Portugal
Portugal, Alcochete: Freeport Designer Outlet Lisboa officially opened on September 2004, offering over 200 retail...
Information and advice
Grundfos is a world-wide provider of pumps and related systems. We have a trained staff of service engineers who will be able to support you during the installation phase of the pump or solution. Grundfos products are manufactured to very high standards, which helps to ensure a long life. Our many years of experience of different kinds of installation and with installation techniques are also key factors for maximising the lives of your Grundfos products or systems.
We will be able to support you with the following:
- Information about the proper protection of our pumps
- Advice on the physical positioning of the pump for necessary service/repair
- Advice on the physical positioning of the pump to maintain proper operation
- Correct cabling to fulfil the requirements of good practice and electromagnetic compatibility
Please contact your local Grundfos company to obtain full support for your new installation.
In order to achieve optimum performance, it is very important that the product/system is set up and adjusted correctly from the outset. The knowledge and experience of the Grundfos service technician, and the use of dedicated Grundfos service tools to adjust the performance of the pump, together guarantee that the greatest possible efficiency and fully correct operation of the equipment are both achieved. Commissioning of the pump is recommended in the following cases:
- If the pumps are controlled by a frequency converter
- If the pump system is operating in a large system, e.g. a building management system
- If the user wants to be trained in the proper operation of the pump
- If the pump is a vital link in an important production/application facility
- Where the setup is crucial for the Grundfos product to operate for its full planned life, e.g. in water treatment applications. In such cases commissioning is not only recommended but required
- Where safety is an issue, e.g. in disinfection systems
The commissioning is performed in a step-by-step procedure, and a report of the settings of the pump is produced.
Do not hesitate to contact your local Grundfos company to arrange for the commissioning of your newly-installed Grundfos product.
Recommended spare parts
Even though the Grundfos strategy is to supply the best possible pump solutions to our customers, after a long period of operation there will be wear and tear to some of the components in certain situations. If short operating downtime is a requirement, or if the pump is installed in inaccessible areas where delivery of spare parts may take a long time, it is advisable to maintain a small stock of recommended spare parts on site.
Please contact your local Grundfos company to obtain information about recommended spare parts or service kits for your Grundfos product.
Grundfos offers an efficiency analysis of your existing pump system, providing you with suggestions for increasing efficiency and thus for achieving cost savings over time.
Increase the efficiency of your existing system
Conducting an efficiency analysis of your existing pump system provides you with a basis for increasing efficiency and thus for achieving cost savings over time. An efficiency analysis results in suggestions for increasing efficiency and will show how this will save you money.
Grundfos offers the following levels of analysis for assessing the efficiency of your pump system:
- Installed base checks.
A basic evaluation is carried out purely on the basis of the data from the identification plate on the pump, comparing its performance with that offered by newer, more efficient technology and materials found in modern pumps.
- Pump efficiency quick check.
Pressure and the consumption of the pump in kWh are measured. Flow is estimated on the basis of available pump data and the results of the measurements.
Some of the resulting suggestions for improving efficiency might include a speed control upgrade, a motor upgrade, differently dimensioned pipes, the installation of a controller, or perhaps an agreement for routine service.
Complete pump audit
The efficiency analysis offered by Grundfos makes up the first step in our Pump Audit, a diagnostics tool that we use to check whether the pump system is operating at the optimal energy consumption to guarantee that your costs are kept to an absolute minimum – now and in the future. See "Replacement analysis" to find out more about the Grundfos Pump Audit.
A Grundfos service agreement ensures the efficient and uninterrupted operation of your pump system and gives you access to Grundfos service centres and authorised service partners worldwide, 24 hours a day.
Prevention is better, and more cost-effective, than cure
Once you have purchased your pump, you will want it to function efficiently and reliably; a formal service agreement with Grundfos will give you peace of mind. It also makes sound economic sense, giving you a firm costing for your maintenance budget and access to substantial discounts.
You simply combine a range of service programmes to suit your needs – and then let us carry out scheduled maintenance visits to prevent downtime. We offer three types of service agreement, available for all pumps:
Whichever agreement you choose, your equipment will always be serviced by specially trained staff.
The cost-effective choice
Well-maintained pumps can reduce your energy consumption by up to 50 %. Furthermore, it's worth remembering that in a series of pumps working together, one faulty pump can affect all the others. A Grundfos service agreement keeps the total cost of operating a pump to a minimum. Our careful calculation of the life-cycle cost of all our products means that we have an overview of the true costs of owning each of our pumps.
Signing up for a service agreement and letting our highly-skilled service technicians service your pumps is a safeguard against unforeseen expenditure. Regular servicing and maintenance of your pumps will ensure that they operate with optimum efficiency.
Repair and maintenance
Grundfos Service will maintain and repair your pumps. Our service professionals can also advise you on efficiency issues, offering suggestions for saving money in the long term.
Repair and maintenance of your existing pump systems
Naturally, you can always call Grundfos for the repair and maintenance of pumps you have purchased from us. Grundfos can repair your pumps to the same specifications as new. However, it is important to remember that an upgrade or even a replacement pump can be cheaper than repair in the long term. See "Upgrades and Replacement" for how this makes good business sense.
Effective service – wherever you are
Grundfos Service is always close by. Working in collaboration with our local authorised service partners we offer worldwide service. Help from qualified pump professionals is never far away, whether you need immediate assistance or are interested in hearing about opportunities for making savings.
Grundfos Remote Management
Grundfos Remote Management is a cost-effective, secure and reliable way to monitor and manage pump installations from an Internet PC at a very low cost.
Connecting pumps and people
With a secure and reliable remote management system, you can monitor and manage your pump systems from an Internet PC at a very low cost.
Grundfos Remote Management is a cost-effective and straightforward system for monitoring and managing pump installations in commercial buildings and in water supply and wastewater systems. It reduces the need for onsite inspections, and in the event of an alarm or warning, the relevant people are notified directly.
The system offers a wider range of benefits and functions than mobile-phone-based monitoring. For those who do not require remote process automation, Grundfos Remote Management is the ideal solution for monitoring and remote control, rather than traditional SCADA (Supervisory Control and Data Acquisition) systems. Initial investment is minimal, and a fixed low fee covers data traffic, hosting costs and system support, including back-up of all data.
Efficient alarm management
The on-call schedule in this new telemetry system ensures that alarm messages from onsite controllers go directly to the relevant people. The system manager can log on from a PC anywhere and plan who is to receive alarm messages from each installation at any given time of the day. Managers can plan for years ahead, and can easily handle day-to-day exceptions to the schedule.
Optimise service and maintenance
Changes in pump performance can be tracked using trend graphs generated automatically by the system. This tracking can give an indication of any wear or damage in the installation, and service and maintenance can be planned accordingly.
The communication interface (the CIU271 modem) enables data transmission via GPRS/SMS from your Grundfos pumps and controllers. The built-in multi-purpose I/O board allows you to connect sensors and switches.
The Grundfos Pump Audit is our replacement analysis. It is a complete diagnostic tool that considers your facility, the energy efficiency of your system, and the total life-cycle costs of your pumping solution. It provides detailed recommendations for replacement, including estimated payback time.
Let our Pump Audit tell you how to save on energy costs
Grundfos Pump Audit is the name we give to our replacement analysis This complete diagnostic tool developed by Grundfos is used to identify excessive energy consumption in any kind of pumping system. Our experience with pump audits shows that in many cases, 30-50 % of the energy consumed by pumps could be saved.
The purpose of CAPS is to provide a complete tool that contains both an extensive catalogue of Grundfos products and a sizing program to select the most suitable pump for your application.
There is also a comprehensive pump replacement selection function for central heating circulator pumps, hot water pumps and wastewater S pumps, and a function for producing professional quotations that include curves, drawings, quotation texts, wiring diagrams, etc.
Last but not least, the software contains the instruction and operating manuals for nearly all Grundfos pumps in multiple languages. Service drawings, exploded views and parts lists are available for all sewage products as well as several other pump types.
CAPS is available in two versions: WinCAPS, available on CD-ROM, and the online version WebCAPS, available at the Grundfos website. Additional features in WebCAPS include CAD Drawings and Literature.
"BE Responsible" is one of our core values at Grundfos. It is essential to us that our pumps are designed for low energy consumption and the highest possible performance throughout their operating lives. One consequence of this is that service offerings, including spare parts and replacement kits, are defined in the development phase.
Customised service offerings, online ordering and rapid response distribution centres ensure that you have the parts when you need them.
Recommended Spare Parts List
The list specifies the parts you should keep on site to service your pumps. These recommendations can be found at the product site in our WebCAPS tool.
Specially designed service kits
Service kits include everything you need for a specific maintenance or repair task, including instructions for dismantling, replacement and reassembly.
24-hour spare part delivery service
To be extra sure that you do not have to wait, we can set aside a stock of spare parts that are critical for your operation. This will ensure that they are available whenever you need them.
We guarantee that spare parts for any Grundfos pump you buy today will remain available for at least the next 10 years.
Service online tool
24-hour access to our online tool WebCAPS is available from any PC. All the technical documentation and information you need to service your pumps is immediately available to you, at any time:
- Service instructions
- Step-by-step service videos
- Interactive exploded views
- Sectional drawings.
A service video is available for this product. The service video is an easy way to see how to disassemble and assemble the pump.
The WebCAPS literature and service sections offer quick and easy access to service videos.
There are two different ways to access the videos from the WebCAPS home page:
- via Service
- via Literature.
The videos are also available on CD-ROM and DVD.
Select country to contact your local sales company
Select country to contact your local service center